Buyer FAQ

Concise technical answers regarding naval Integrated Platform Management System, dynamic positioning classes, obsolescence risk mitigation, regional territory coverage, and hybrid-electric operating modes.

Clear technical guidance for fleet superintendents, electrical engineering managers, shipyard directors and naval procurement officers.

Questions & Answers

An Integrated Platform Management System monitors and controls a naval vessel's platform machinery from consolidated operator workstations: propulsion machinery, electrical power generation and distribution, auxiliary systems, HVAC, watertight doors and battle damage control. Praxis Integrated Platform Management System runs on the Mega-Guard platform, incorporating specialised naval modules including firefighting damage control, an Electronic Incident Board (EIB) and an On-Board Training System (OBTS) to support lean naval watches.

Dynamic positioning systems automatically control vessel position and heading using active thrust. Equipment classes follow IMO guidelines (MSC/Circ.645 and MSC.1/Circ.1580): Class 1 has no redundancy, meaning a single fault can cause position loss. Class 2 is designed so that no single active component failure leads to position loss. Class 3 maintains position even following the loss of an entire fire- or flood-compromised compartment. Classification societies issue vessel notations based on these criteria.

Praxis designs and manufactures its own electronic processing boards, circuit hardware and application firmware in Leiderdorp, Netherlands. Because we do not rely on third-party commercial PLCs, we control product lifecycles directly. Praxis maintains an official corporate policy of 20+ years of parts support, issues advance obsolescence notices with itemised replacement modules, and engineers form-fit-function replacement units (such as migrating from Pro-Series to E-Series) to modernise operational vessels, in many cases without rewiring.

Praxis Automation Far East operates from Singapore as the dedicated sales, delivery and lifecycle engineering hub for Southeast Asia, South Asia and the GCC. Project engineering, drydock set-to-work, spare parts warehousing and technical support are managed directly on Singapore time (SGT, UTC+8).

Mega-Guard is Praxis's proprietary marine platform combining ship automation, dynamic positioning, propulsion control and electric drive electronics. A single modular DIN-rail hardware family is configured via software to perform varied duties—including alarm monitoring, power management, Dynamic Positioning control and battery management. This unified architecture minimises onboard spare parts variety and provides watchkeepers with a consistent operating interface across all shipboard machinery.

Our Singapore team manages complete class-ladder upgrade programmes (moving vessels from DP1 to DP2, or to Class 3) during scheduled shipyard drydocks. We perform FMEA gap analysis, interface new controllers with existing thruster drives and position sensors, and pre-tune hydrodynamic models on a mathematical factory ship simulator prior to dispatch.

Permanent-magnet GreenMotors, GreenInverters and liquid-cooled LFP GreenBattery systems operate under unified Mega-Guard energy management, as proven on the Singapore patrol craft MPA Guardian.

Yes. Mega-Guard E-Series and AI-Series monitoring and control systems hold ClassNK Type Approval Certificate TA26564M for cyber resilience, compliant with IACS UR E27 Rev.1 and ClassNK rules. The certification covers alarm and monitoring, power management, propulsion control, fire detection and dynamic positioning. Praxis supplies the asset inventories, network topology drawings and verification procedures required for vessel-level IACS UR E26 compliance.

Yes. Many operational vessels lack updated electrical schematics. Praxis engineers perform comprehensive shipboard pre-engineering surveys prior to drydocking, physically verifying field sensor wiring, power distribution circuits, switchboard terminations and governor signals to generate precise interface engineering packages.

Yes. The modular design of Mega-Guard allows progressive modernisation. For example, an operator can replace the alarm and monitoring system during an initial voyage maintenance window, upgrade power management and propulsion levers during an intermediate drydock, and execute a dynamic positioning class upgrade during a subsequent major survey.

Praxis Automation Far East deploys commissioning engineers to shipyards and afloat repair berths across Southeast Asia, South Asia and the GCC—including yards in Singapore, Malaysia, Indonesia, Thailand, Vietnam, India, Saudi Arabia and the United Arab Emirates.

Praxis Care service agreements are customised to fleet operating profiles. Agreements typically combine dedicated spare parts stocking in our Singapore warehouse, priority field engineer deployment, scheduled annual health checks, remote diagnostic monitoring via Internet Ship View, and structured obsolescence reviews backed by our 20+ year parts support policy.

Have a Specific Technical Requirement?

If your fleet has specific classification notation requirements, complex machinery interfaces or an upcoming docking deadline, discuss your scope directly with our Singapore engineering desk.

Please do not include classified, export-controlled, or sensitive defence operational information in web enquiries.