Dynamic Positioning System

Confident position-keeping, integrated vessel automation and long-term lifecycle support for newbuilds and retrofits.

Dynamic Positioning Class 1, Class 2 and Class 3 on one common Mega-Guard hardware line, integrated with power management and thruster controls across Southeast Asia, South Asia and the GCC.

Class 1 to 3Class notations on one platform¹

¹ Dynamic Positioning Class 1, Class 2 and Class 3 notations subject to vessel thruster layout, FMEA analysis and classification society approval.

The Operational Cost of Ageing Dynamic Positioning Controls

1. Position Dropouts and Off-Hire Penalties

Processor faults or sensor dropouts on ageing positioning systems force immediate operational aborts.

  • The vessel is placed off-hire immediately while awaiting technical investigation.
  • Energy operators and charterers lose confidence, impacting future contract awards.

2. Discontinued Electronics and Loss of Redundancy

Spare processing cards and operator consoles for legacy systems go out of production.

  • A single electronic failure can compromise the redundancy required to maintain class notation.
  • Unsupported equipment results in survey condition findings and restricted operations.

3. Prolonged Drydock Downtime

Replacement programmes requiring wholesale vessel rewiring prolong shipyard stays.

  • Extended drydock stays incur high yard fees and lost commercial charter earnings.
  • Lengthy commissioning and sea-trial schedules delay return to commercial service.

Upgrade the Vessel You Have

Retain Functional Vessel Infrastructure

Switchboards, thruster drives, position reference sensors and field cabling are preserved where they satisfy class standards, as demonstrated on Bourbon Evolution 801 and 803.

Factory Simulator Pre-Tuning

Engineered Redundancy

Dynamic Positioning Class 3 features triple independent controllers, segregated I/O enclosures and three isolated network backbones to prevent single points of failure.

Unified Hardware Architecture

Dynamic positioning operates on the same Mega-Guard electronic hardware modules as vessel management and propulsion control, reducing spare parts inventory.

Subsystems of the Mega-Guard Dynamic Positioning Family

Operator Workstation

High-resolution touchscreens and trackball panels display electronic chart overlays, vessel position footprints, thruster capability envelopes and sensor health.

Independent Joystick System

Standalone joystick controller with dedicated heading control for manual positioning backup, supplied with Class 1, Class 2 and Class 3 installations.

Distributed Thruster Controllers

Dedicated controllers on redundant communication networks provide direct setpoint control for azimuth, tunnel and controllable-pitch thrusters.

Position Reference Integration

Interfaced with third-party and Mega-Guard reference systems including DGPS/GNSS, hydroacoustic positioning, laser sensors and taut-wire units, plus motion reference units and gyrocompasses.

Dynamic Capability and Power Limiting

Real-time capability diagrams calculate position-keeping margins under environmental loads; direct links to power management prevent generator blackouts during peak thrust.

Built-In Simulator-Trainer Mode

Train bridge officers on the primary workstations when the vessel is alongside or in transit, meeting Nautical Institute Class C simulator standards.

Frequently Asked Technical Questions

Harbour acceptance trials, FMEA proving trials and class surveyor sign-offs proceed strictly according to the agreed class programme.

Yes. Praxis executes complete class-ladder upgrade programmes—from initial FMEA gap analysis and electrical drawings through to hardware installation and class proving trials.

Yes. Mega-Guard interfaces with all major satellite positioning systems (DGPS/GLONASS with differential correction), acoustic positioning (USBL/HPR), taut-wire systems, optical sensors, gyrocompasses, wind anemometers and vertical reference units. Compliant operational sensors are retained during retrofit.

Dedicated Dynamic Positioning Lifecycle Stewardship

After commissioning, our Singapore engineering hub provides long-term lifecycle support under Praxis Care™, including regional spare parts stocking, scheduled obsolescence reviews and deploying field engineers across Southeast Asia, South Asia and the GCC.

Specify Your Dynamic Positioning Upgrade

Share your vessel particulars, current positioning notation, thruster configuration and docking schedule with our Singapore technical team.